997 GT3 rear spoiler fits all 997 (not turbo) includes: deck lid (grp), aluminum upright, 3rd brake light housing and kevlar/carbon wing (l= 145cm, b=28cm, h=7 cm) with carbon rsr look end plates. Material: aluminum, glass reinforced plastic (grp), kevlar-carbon. Also available with wing blade in fiber (grp) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x

This item may ...(choose a part on the right to read more)

General Fitment

If you install a fixed rear spoiler you need this cable.
It turns off the warning light from the rear spoiler on the dashboard.

Fits: GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

The lowering management system (lms) lowers the front axel up to 40 mm and the rear axel up to 30 mm. There are no extra switches or buttons, the o.e.m switch works the same in controling level and damping rate, electronic, diagnosis, pasm, ptm, and psmsl. Installation takes approx. 45 minutes. please provide your sales associate with the year, model and vin number of your vehicle when ordering!

kit includes: lowering management system, instructions (with wiring diagram), and a chip to return the suspension in a matter of seconds!

Fits: diesel, 3l, 176kw (09-10), GTS, 4.8l, 298kw (08-10), turbo s, 404kw (09-10), turbo, 368kw (07-10), s, 283kw (07-10), v6, 3.6l, 213kw (07-10), turbos, 4.5l, 383kw (06-0...(choose a part on the right to read more)

General Fitment

This is the chrome fog light with red lens that mounts on the rear of the European 930 turbos.

General Fitment

If you want the ultra wide-body looks and light weight, we offer these fiberglass flares for the front and rear, in different styles and widths. These fender flares are 9 inch turbo-style. The wheel arch has a more flat surface.

General Fitment

Hawk hps rear brake pads Porsche 944 87-89

Hps - high performance street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose hawk performance_s hps braking compound. This unique ferro-carbon formula was developed for street performance using the safety and quality of aerospace and motorsports severe-duty friction technology.

the high performance street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you_ll have a highl...(choose a part on the right to read more)

General Fitment

Hawk hps rear brake pads Porsche 996 c2/c4 98-03

Hps - high performance street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose hawk performance_s hps braking compound. This unique ferro-carbon formula was developed for street performance using the safety and quality of aerospace and motorsports severe-duty friction technology.

the high performance street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you_ll have a...(choose a part on the right to read more)

General Fitment

Hofele-design is an innovative company in the product range of car accessories with international markets, and supply these accessories to important car producers and trade companies worldwide. They specialize in a few specific automotive brands such as audi, Porsche and volkswagen. Specially for these brands, the "hofele-design-edition" was created.

High-tech accessories are made in the highest quality materials known to man. Created, developed and produced with the best actual standards, with sportive, noble elegance.

The hofele light-facelift rear apron gives the rear of your 02-07 Porsche Cayenne the look of an 08-10 Cayenne turbo / GTS, without the need to purchase a new car! Made from a heat...(choose a part on the right to read more)

General Fitment

Hofele-design is an innovative company in the product range of car accessories with international markets, and supply these accessories to important car producers and trade companies worldwide. They specialize in a few specific automotive brands such as audi, Porsche and volkswagen. Specially for these brands, the "hofele-design-edition" was created.

High-tech accessories are made in the highest quality materials known to man. Created, developed and produced with the best actual standards, with sportive, noble elegance.

The hofele rear spoiler for the 2010-2013 Porsche panamera non-turbo is positioned exactly behind and at the sides around the original, electric rising Porsche panamera rear spoile...(choose a part on the right to read more)

General Fitment

Hofele-design is an innovative company in the product range of car accessories with international markets, and supply these accessories to important car producers and trade companies worldwide. They specialize in a few specific automotive brands such as audi, Porsche and volkswagen. Specially for these brands, the "hofele-design-edition" was created.

High-tech accessories are made in the highest quality materials known to man. Created, developed and produced with the best actual standards, with sportive, noble elegance.

The hofele rear spoiler for the 2010-2013 Porsche panamera turbo is positioned exactly behind and at the sides around the original, electric rising Porsche panamera rear spoiler. I...(choose a part on the right to read more)

General Fitment

We are an authorized reseller and installer of jrz suspension. As racing enthusiasts ourselves, we know that the best suspension for street or for track is by jrz. With years of engineering, race testing, and winning, jrz provide the driver with the best possible handling vehicle for their driving needs.
Jrzs double adjustment coilover is the ultimate in handling for the track and aggressive street driving. The double-adjustable shock allows external adjustment of both rebound and compression. In addition to the same precise and accurate rebound adjustment mechanism in the single-adjustable, the double-adjustable shock has a remote reservoir with the compression adjuster and gas volume. This reservoir is conne...(choose a part on the right to read more)

General Fitment

For those out there with stock turbo wide flared fenders or using GT racing turbo flared fiberglass fenders, these turbo rocker panels are the finishing touch. They tie the front and rear fenders together and add the appearance of width to your Porsche. For cars with 9 and 11 inch wheels.

General Fitment

Moton club sport damper system Porsche 944 turbo 85-94

The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.

The club sport damper is double adjustable w...(choose a part on the right to read more)

General Fitment

Roof skin for racing cars

- up to 30kg weight advantage (elimination sunroof)
- kevlar / carbon mat
- adhesive mounting technology

Mounting:
Remove front and rear windows, detach roof trim left and right, drill out old roof, put new carbon roof on and glue with special adhesive technology, install front and rear windows, mount roof trim left and right.

Fits: GT3 r, 4l, 331kw (11-), GT3 rsr, 335kw (11-), 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 368kw (11-), 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), Carrera GTS4, 300kw (12-), Carrera GTS2, 300kw (10-), c...(choose a part on the right to read more)

General Fitment

Speedart rs rear diffuser Porsche Cayenne 03+

The speedart Cayenne rear diffuser is made from high quality fiberglass and attaches to the stock Cayenne turbo rear apron. Cayenne v6 and Cayenne s models must upgrade to the new rear apron. This 3-piece unit has a removeable center section that allows enthusiasts with trailer hitches utility access. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.

General Fitment

Speedart rear wing blade Porsche 997 turbo

Rear wing blade gives your Porsche a sportier style and enhances aerodynamics. Comes ready to paint. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.

General Fitment

Medium friction racing compound with immediate low temperature response. Fading resistance up to 500 deg. C ( 930 deg. F). The rs 4-2 beds quickly and has a very good modulation (controllability). It is a classic rally compound and one of the most commonly used pad in small single-seaters. Can be used as a rear pad in combination with a higher friction front pad. Application: f-ford, f-bmw, f- renault, f3, gravel rally, slalom (auto cross), hill climb, club racing, show room stock racing.

Fits Porsche:
993 3.6 turbo & turbo GT2
993 3.8 Carrera rs & rsr
993 GT2 & rsr (380 disc)

General Fitment

Medium friction racing compound with a higher average friction value than the rs 4-2. It is disc friendly with a predictable, non-aggressive friction behaviour (stable torque). Fading resistance up to 560 deg. C (1,050 deg. F). It is a very good rear compound for touring car applications in combination with rs 14 front pads. Application: club racing (very popular in Porsche club racing), touring cars, GT cars and single-seater up to f3.

Fits Porsche:
993 3.6 turbo & turbo GT2
993 3.8 Carrera rs & rsr
993 GT2 & rsr (380 disc)

General Fitment

If you are ready to enhance the look of your Porsche 996 c2 or c4 narrowbody, then you will want to check out this turbo look rear bumper from precision Porsche. Made from high quality composite fiberglass, this rear bumper is a complete replacement for your stock unit. The bumper has the built in intercooler vents at the bottom to give you that turbo look. The bumper comes unpainted and is ready for prep, prime, and paint. Each bumper is carefully inspected before it ships to ensure its high quality. These bumpers ship via oversized freight only.

General Fitment

This special tool is crucial for the removal and reinstallation of rear spoiler on Porsche 996 turbo models. Please call our office for availability.

General Fitment

Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.


Features:

Sport rear silencer fo...(choose a part on the right to read more)

General Fitment

Premier4509 complete kit is constructed with frp & carbon fiber. The veilside craftsmanship is top notch with only the highest quality materials available.

This aerodynamic kit is precision hand made and consists of a front bumper, pair of side skirts and a rear bumper. The entire kit is limited to 300 sets worldwide and come with a numbered limited edition plaque, certificate and emblems.

If you are looking for a way to make your Porsche panamera stand out, then look no further than the premier 4509 kit.

All items come unpainted. Turbo model fog lights required. All carbon pieces use japanese carbon 1x1 plain weave.

General Fitment

View/Change Diagram

Cayman 2006-08 - Electrical	Cayman 2009-12 - Electrical
911 2005-08 - Electrical	911 2009-12 - Electrical
911 Turbo/GT2 2007-09 - Electrical	911 Turbo/GT2 2010-13 - Electrical

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Known as: brake pad repair set

View/Change Diagram

Boxster 1997-04 - Brakes/Wheels	911 1998-05 - Brakes/Wheels
911 1998-05 - Brakes/Wheels	911 Turbo/GT2 2001-05 - Brakes/Wheels
911 GT3 2003-05 - Brakes/Wheels